Frete Grátis em todos os produtos
Kit de Reparo de Dente Brige para Preencher Dentes Quebrados e Lacunas – Dentes Falsos Moldáveis e Kit de Substituição de Contas Térmicas
Descrição:
O Kit de Reparo de Dente Brige é a solução ideal para quem busca restaurar a estética do sorriso de forma prática e eficiente. Composto por dentes falsos moldáveis e contas térmicas, este kit foi projetado para preencher dentes quebrados ou faltantes, proporcionando um resultado que se assemelha à aparência natural dos dentes. A facilidade de uso é uma das principais características do produto: basta aquecer as contas em água fervente, moldá-las conforme necessário e fixá-las no local desejado. Os dentes falsos são feitos de um material durável e de fácil limpeza, garantindo que você possa utilizá-los com confiança em diversas situações. O kit é suficiente para criar dentes de substituição em até 35 ocasiões, tornando-se uma opção econômica e prática para quem precisa de uma solução temporária ou até mesmo para emergências.
- Sorriso aprimorado: Restaure a estética do seu sorriso, aumentando sua confiança ao interagir socialmente.
- Dentes naturais: Os dentes falsos possuem uma coloração que se assemelha aos dentes naturais, proporcionando um visual discreto.
- Fácil de usar: O processo de moldagem é simples e rápido, permitindo que qualquer pessoa consiga realizar o reparo em casa.
- Reparo rápido: As contas moldáveis se ajustam perfeitamente ao espaço do dente, garantindo um encaixe seguro e durável.
- Material suficiente: O kit contém material para criar dentes de substituição em várias ocasiões, oferecendo uma solução prática e econômica.
–
Para utilizar o Kit de Reparo de Dente Brige, siga as etapas abaixo com atenção:
- Coloque as contas térmicas em água fervente por aproximadamente 2 a 3 minutos, até que estejam completamente amolecidas.
- Retire as contas da água com cuidado e molde-as rapidamente em um formato que se assemelhe ao dente que precisa ser substituído, seguindo as instruções do manual.
- Pressione o dente moldado firmemente contra o espaço vazio ou quebrado, assegurando que ele se encaixe corretamente.
- Mantenha a pressão por alguns minutos até que as contas esfriem e endureçam, garantindo uma fixação segura.
- Após o endurecimento, verifique a firmeza do dente e faça ajustes se necessário para um encaixe perfeito.
Jamie –
Tried to test the size to my 2 front teeth before trying the beads but unfortunately it’s made for tiny teeth it barely covers my teeth I am sure if it was a bigger size they would be great sad I bought something I can’t use I am an adult just need to find a bigger size for adults
Milissa –
I have an extreme phobia when it comes to dental work. I had a crown that broke off right after my daughters wedding, Thank God 😊 it wasn’t before her wedding. However with this I wouldn’t have worried at all. My only suggestion is to not give up. It takes a little practice and playing around with this to get it right. It didn’t take me long to perfect it. I also eventually used super glue to attach the melted beads which helped it last longer. But definetly a perfect quick fix until you get into a dentist. No one even knew it was fake. Even the dentist complimented my skills. Great confidence booster. I wouldn’t go anywhere before I found this. Thank You. ❤️
Ginny –
Be careful the clear adhesive is like cement!!! I had a very hard time removing. But it works. Just be aware lol. To remove the tooth after application I strongly suggest you use as hot as water you can stand in your mouth to let the gel melt again. Otherwise if you try to pull it you could end up removing a good tooth. That’s how solid this stuff dries. Again, if works but I have used other products that make removal way less scary. I thought I was going to have to go to ER bec it would not come off. Not cool there should be some kind of warning that tells you this and how to remove it was pretty scary when I couldn’t pry the stuff off.
Robert –
The media could not be loaded.
I have had problems with my teeth since childhood. I won’t go into details. Even the dentist could do limited improvement without really expensive solutions. It only got worse as I got older. I bought this product in the small size first. At first I was frustrated because the instructions sucked. I found some YouTube videos that help me out. I created a wrap around (my idea). It looked great. But they were stuck to my teeth. After about 3 weeks I needed to get them off as they were turning color. I put a napkin in my mouth and used an eye dropper to apply boiling water in small doses, which dropped into the napkin. Didn’t want boiling water to be dropping into my mouth. The boiling water softened them up and I could get them off. As you might suspect my mouth smelled like a sewer.
Afterwards I thought of making something temporary. A set that I could take in and out and wash out once or several times daily. Wash out my mouth too. I didn’t wrap them too far in the back. This way they would be easier to take off and put back on. Once dry I wiggled them off. It works great. I bought a larger bag (not this one) of the beads so I would have more product to work with.. I can eat with this wrap and wear them all day. This is a life saver. At a little distance you can barely tell them from real teeth. Of course you have to take the time to do trial and error in making a wrap or repair. It’s a bit of sculpting type work. But it’s worth it.
You’ll want a dental tool or something similar to create the tooth lines, appearing to be separate teeth. I’m getting better at creating a set. I figure that each set from my bag costs less than 25 cents to make. A great deal. I could never figure out how to make the veneers work. If reviewers tell you this product doesn’t work they just haven’t found the right solution. Of course not everyone needs or wants a wrap. You situation might be one tooth. This may not fix every person’s problem, but it definitely can fix problems. You have to use some creativity. There really should be a Facebook group or something to share implementation strategies. (Sorry, I’m too busy to start that.)
In the first video segment I show you non-stop from my bare teeth to putting on my self made wrap. You can see this is for real. In the second I show how I would apply boiling water If I can’t get a wrap off because I made it too firm. For bottom teeth one might want to dip a cloth in boiling water to get any wrap off that is on too strong. The key is to think out your design. You have a product that you can mold for your purposes. How you use it is up to you. I’m giving 4 star because the instructions sucked. But this product is 5 star in my life.
Walker –
Here is the thing. When this arrived, I honestly wasn’t that impressed. But considering I had just lost a $500 “flipper” tooth (the dentist wanted $500 more for a replacement) I was willing to give anything a try. Honestly, this worked way better than expected! All you need is a bit of patience, some emery boards, a small pair of scissors and a drop of super glue. Pour some of the beads into a large, metal spoon and dip them into some boiling water. It only takes a few seconds for the white beads to turn clear and become pliable. Immediately take the beads out, mash into a ball with your fingers (they’re hot, so be careful!). Press into area the of the missing tooth and form around the space. Take the tooth veneer and press into the front of the missing tooth now filled with the bead material. It stays soft for a little while, so make sure everything is snug. Once everything cools and the mixture hardens, remove the mold. Use the small scissors to cut away excess (keep any excess, it can be melted again for further use) and the emery boards to shape. The veneer had a tendency to fall out of the mold, so a small drop of super glue solved that problem. I used a mixture of coffee grounds and water to stain the tooth a bit to match. I now have a “tooth” that looks natural and is a lot more comfortable than the flipper tooth ever was. Since it molded itself around the surrounding teeth (with a small overlap on my upper palate), it snaps into place–no need for denture adhesive. It’s even more comfortable to eat with. I have enough product left to make several more if need be so if I forget to put in the tooth at home, I have one at the office. I know there are some bad reviews of this product, but trust me, if you take your time with it you will get fantastic results. I only wish I had known about this before I dropped 5 bills on a flipper tooth that only looked slightly better (emphasis on slightly).
Christine –
Do not waste your time buying this product if you have a broke composite veneer.The beads melt and harden up before you can mold it to your teeth.Plastic will never give a secure hold..This was not worth the money charged