Frete Grátis em todos os produtos
RMR-86: O Removedor Instantâneo de Manchas de Mofo e Bolor
O RMR-86 é a solução definitiva para quem enfrenta o desafio das manchas persistentes de mofo e bolor em sua casa. Com uma fórmula inovadora e pronta para uso, este spray de 30 fl oz foi desenvolvido para eliminar rapidamente as manchas indesejadas que podem se infiltrar profundamente nas superfícies. O mofo e o bolor não apenas comprometem a estética dos ambientes, mas também podem representar riscos à saúde. Com o RMR-86, você pode se livrar dessas preocupações de forma eficaz e segura.
- ELIMINE MANCHAS PERSISTENTES DE MOFO E BOLOR: O nosso spray removedor instantâneo é capaz de remover as manchas deixadas pelo mofo negro e bolor, que tendem a deixar marcas feias e difíceis de eliminar.
- USANDO O RMR-86: Para eliminar com segurança e conveniência as manchas e odores de mofo e bolor em ambientes internos, é essencial garantir ventilação adequada e utilizar Equipamentos de Proteção Individual (EPIs) durante cada aplicação.
- SEGURO PARA USO EM MÚLTIPLAS SUPERFÍCIES: O RMR-86 é eficaz na remoção de manchas teimosas em decks, madeira, revestimentos de vinil, drywall, pisos de concreto, paredes de tijolo, superfícies de cozinha e outras áreas propensas ao crescimento de mofo e bolor.
- SPRAY DE AÇÃO RÁPIDA: O nosso poderoso spray removedor de manchas de mofo começa a agir instantaneamente, direcionando-se para manchas profundamente enraizadas que persistem em superfícies e áreas de difícil acesso.
- NÃO É NECESSÁRIO ESFREGAR: Basta pulverizar nossa fórmula pronta para uso na área afetada e observar as manchas desaparecerem diante dos seus olhos!
Benefícios Destacados pela Vitaminer Shop para Comprar
1. Eficácia Comprovada: Remove manchas de mofo e bolor de forma rápida e eficiente, garantindo um ambiente limpo e saudável.
2. Fácil Aplicação: A fórmula pronta para uso elimina a necessidade de esfregar, economizando tempo e esforço.
3. Versatilidade: Pode ser utilizado em diversas superfícies, tornando-se uma solução prática para diferentes áreas da casa.
4. Segurança: O uso de EPIs e ventilação adequada garante que a aplicação do produto seja segura para o usuário e para o ambiente.
5. Resultados Visíveis Imediatos: A ação rápida do spray proporciona resultados instantâneos, aumentando a satisfação do cliente.
- Sugestão de Uso:
Para utilizar o RMR-86, comece garantindo que a área esteja bem ventilada. Coloque os EPIs recomendados, como luvas e máscara, para proteção. Agite bem o frasco antes de usar. Aplique o spray diretamente sobre a mancha de mofo ou bolor, cobrindo completamente a área afetada. Deixe o produto agir por alguns minutos e observe como as manchas começam a desaparecer. Após o tempo de ação, você pode enxaguar a área com água, se necessário, ou simplesmente deixar secar. Para manchas mais persistentes, uma segunda aplicação pode ser necessária. Mantenha o produto fora do alcance de crianças e animais de estimação.
Spike Milne –
Pro:
•Straight off the bat, this stuff is awesome, it shifts the mold in seconds.
Con:
•It’s a bit of a hefty price and then they don’t even supply a spray nozzle 🤦🏼♂️. Come on guys, WTF?
•Your house will smell like a swimming baths once you use it, so keep windows and doors open to help dissipate the smell.
•When you buy a replacement nozzle and/or an entire new bottle, make sure it doesn’t leak beforehand as you really don’t want this stuff on your skin…….. or just wear gloves.
Michelle King –
I can’t believe this really works. It is rare to find a cleaning product that really does what it says and without much work. The guest bathroom has no window so the ceiling was covered in mold. I tried straight bleach with no help. I sprayed this on, left the room to get my phone for a photo. When I returned, the mold was gone. I didn’t get a chance for the before photo. Easy to use and affordable.
Eisa –
Great product and to be honest it blew me away with how effective it was. Removed all the mold and did not leave any stains. I would advise to wear a mask as it is quite strong and does produce a lot fumes which can be quite irritating
Bibi –
Ok, seriously, if you’re brave AND a home owner, BUY THIS.
This is the literally the BEST product for mold or mildew i have ever used.
YES, it may need to be evaluated by the Chernobyl Nuclear Assessment Team down the road, but PLEASE let me explain and leave some application pointers
#1) If you’re not using PPE + a respirator, make SURE you only plan to work on small patches at a time, and in a well ventilated area you can get in and out of to fresh air quickly. I cannot stress this enough. This stuff is STRONG. As in…BLEACH x about 5. You can Taste It.
Do NOT BREATH IT! If you can, hold your breath, hold the bottle at a safe distance, spray the area quickly, then runaway!
“Spray. Then Runaway.”
#spraythenrunaway
#2) Get a CLEAN towel and place it under the door crack of the room you run out of after spraying. use it, ALWAYS! Clean towel is your buddy here.
#3) After 15 minutes, Hold your breath and check out your progress carefully. It dries VERY quickly and the smell/fumes drop to a good 1/2 of what they are during initial application. Again, wait AT LEAST 15 minutes before checking. More mold? Spray a bit more in the areas that need it, …runaway #spraythenrunaway, ….wait 15 more mins and check again….same process as above.
#4 Repeat protocol until about 15-25% of mold or mildew remains.
#5 WAIT 2-5 HOURS then check again. At this point, the mold should be almost 100% gone.
#6 IF more application needed, repeat process again as many times as needed, ….then proceed to fortune and glory.
My Actual Spray Process I used on our Bathroom Window Casing:
1. Remove Blinds.
2. Cut large piece of cardboard out to use as a mask for window vinyl, steel or fibrex behind the wood casing.
3. Grab paper towels, about 10 squares and fold them into little wads that can be stuffed at the bottom of the window sill’s left and right sides to catch the runoff from the vertical side casings.
4. Grab a small ziplock bag to store the used paper towels in and keep them sealed up and the fumes contained. You can just leave that in the sink.
5. Get a fan and set to low about 3 feet from the open window and blowing toward it.
6. Grab your cardboard and your RMR 86, take a deep breath, hold it….hit the left side wood casing, using the cardboard as a mask for the window behind the casing, hit the right side, same process. Do NOT try and do the top casing, or spray will potentially come back down on you and get on your skin. Don’t overspray. Just hit them quickly enough to cover each side. About 15-20 seconds total should be fine. Stuff paper towel squares in the lower right and left window frame, runaway! (for me, I closed the door behind me and stuffed a paper towel under it. Worked like a charm as the smell never got into the rest of the house.
15 minutes later, I cautiously walked back in each time, smelling carefully from a distance and as I approached, as I said, the fumes and volatility drops a LOT after the first 15 minutes but is still STRONG!
I removed the paper towels used to capture the runoff in the lower left and right sills, sealed them in the baggie, dropped it back in the sink. Then went outside the room to fresh air, took another deep breath and repeated step 6.
Our casing was BAD, so I had to hit it about 4x over an hour.
For me, and because I was doing such a small area with plenty of ventilation, I did not go full PPE or respirator. I used long dish gloves, goggles and held my breath each application, keeping the airflow via a fan pushing air OUT the wide open window and as to move any overspray or fumes outside asap.
The first application, not a lot of difference. Second, BIG difference. By application 4, 85% of the mold and mildew were gone and we were looking at CLEAN wood. Next morning, I checked and the mold was 100% GONE…so this stuff KEEPS working long after that 15 minute mark. I’d say it likely keeps working up to 24 hours after application so expect to see additional progress on the affected area up to a day later.
For the TOP casing, I waited until the sides were treated as explained above. Then 2 days later, I used the same ventilation setup as before. This time, I grabbed a paint brush, poured a tiny bit of rmr 86 into a plastic cup, and lightly painted it onto the top casing, still wearing gloves and goggles. It took more applications…i believe 5 or 6, but was a lot less stressful as I was using so little of the stuff and the fumes, although still bad, were no where near what spraying did. Each application, I’d let sit 15-20 mins, and I kept the paint brush and tiny bit of RMR solution in a cup in the sink so I could just grab and go each new session or dump out with running water. This worked well on the top casing as it was no where NEAR as caked as the left and right sides were, but something tells me, spraying/aerating this stuff out of the bottle must increase effectiveness, as it IS a corrosive and reacts with O2.
I’d say if you’re doing ANY job larger than what I described here, go Full PPE with Respirator and make SURE the room you are working out of is well ventilated and siphoned OFF from the rest of the house.
If you’re just squirting a few corners of your bathroom…1-2 squirts, 1 area at a time, then gloves, eye protection and lotsa of ventilation should be fine. Higher up areas, I’d recommend the paintbrush trick. And I’d personally NEVER try and spray multiple areas in the same room…I’d do 1 at a time and leave. Even a few squirts in a few areas adds up fast, and you don’t want to create a potential “fume trap” by which you get a breath of lingering spray and burn your lungs/throat, etc. Not worth it!
M Kopps –
Strong, efficient, quick to work, works on almost any surface within minutes. The only drawback is the strong chemical odour (but given how quickly and effective this works, it’s not really an issue). The best mould remover in the market Bar None
Bronwyn Johnston –
It promises to remove mildew stains from concrete and stucco. We followed the directions exactly and it made absolutely no difference. I wasted $90. I got better results with vinegar. Very dissatisfied.
J. Knibb –
Despite being pictured with a spray head, the order contained only the bottle. I had to find a spray head and the first one leaked. This was bad news because you don’t want to get this stuff on you or your clothing.
Once fitted with a reliable spray head it was highly effective. Mould vanishes in minutes and so far has nor returned (2 months). It smells so strong your eyes will water. After an hour or two of room ventilation it is more tolerable. It’s gone by 24 hours. But the anti mould effect remains.
Work clothes, cloves and eye protection recommended. Some may find a respirator (or a face mask) is needed, particularly in enclosed spaces with poor ventilation. It’s worth the effort.
KJ –
Banish mold and mildew stains quickly and effectively with RMR-86 Instant Mold and Mildew Stain Remover Spray, a powerful cleaning solution designed to tackle even the toughest stains with ease. Whether you’re dealing with stubborn mold and mildew on walls, ceilings, tile grout, or other surfaces, this fast-acting formula offers rapid results, restoring surfaces to their original condition in no time.
Rapid Stain Removal: The standout feature of RMR-86 Instant Stain Remover is its ability to eliminate mold and mildew stains on contact, without the need for scrubbing or scraping. The powerful formula penetrates deep into porous surfaces, breaking down and dissolving stains at the molecular level for fast and efficient removal. Within minutes, stains disappear, leaving surfaces clean, bright, and mold-free.
Versatile Application: Suitable for use on a wide range of surfaces, including walls, ceilings, tile, grout, concrete, and more, RMR-86 Instant Stain Remover offers versatile cleaning power for various indoor and outdoor environments. Whether you’re tackling bathroom mold, basement mildew, or outdoor mold growth, this spray provides the versatility and effectiveness to tackle any staining challenge.
Easy-to-Use Spray Bottle: Designed for convenience and ease of use, RMR-86 comes in a convenient spray bottle that allows for effortless application. Simply spray the solution directly onto the affected area, ensuring full coverage of the stain. There’s no need for mixing or diluting the formula, saving time and effort in the cleaning process.
Fast-Acting Formula: Unlike traditional mold and mildew cleaners that require prolonged soaking or scrubbing, RMR-86 works quickly to dissolve stains on contact. Within seconds of application, the powerful formula begins to break down mold and mildew, allowing you to see visible results within minutes. This fast-acting formula makes RMR-86 ideal for busy households or commercial environments where time is of the essence.
Safe and Effective: Despite its powerful cleaning action, RMR-86 Instant Stain Remover is safe for use in homes, offices, and other indoor environments. The formula is non-toxic, bleach-free, and low-odor, making it safe for use around children and pets. Additionally, the biodegradable formula is environmentally friendly, ensuring minimal impact on the surrounding ecosystem.
Professional-Grade Results: Trusted by homeowners, contractors, and restoration professionals alike, RMR-86 Instant Stain Remover delivers professional-grade results with every use. Whether you’re tackling a small mold problem or a large-scale restoration project, this potent cleaner offers the performance and reliability to meet your needs, restoring surfaces to their original condition with minimal effort.
In conclusion, RMR-86 Instant Mold and Mildew Stain Remover Spray offers powerful cleaning performance and rapid results for removing stubborn mold and mildew stains from a variety of surfaces. With its fast-acting formula, versatile application, easy-to-use spray bottle, safe and effective formula, and professional-grade results, this stain remover provides everything you need to tackle even the toughest staining challenges with confidence and ease. Whether you’re cleaning bathrooms, kitchens, basements, or outdoor surfaces, RMR-86 delivers unbeatable performance, restoring surfaces to their pristine condition and ensuring a cleaner, healthier environment for you and your family.
C. Burns –
I used this product in a bathroom with a popcorn ceiling. My kids were using the shower and not turning on the bathroom fan. Black mold developed on the ceiling. I was a little worried at first because the instructions say to spray it on, let set for 15 seconds and then rinse. I didn’t want to do that on the popcorn ceiling because it could cause the texture to come off.
I sprayed RMR directly onto the areas with mold and within 30 seconds the mold was gone, and the ceiling was back to white. There is a very heavy chlorine smell that happens. I turned on the bath fan and let it air out for an hour. After a day the smell goes away. It’s been a week and there no signs of the mold returning. I’ll update if that changes.
Great Product!!!! Works as advertised.
Brenda P. –
This stuff is absolutely amazing. I sprayed it on mildew on tile caulk in our shower and it was like magic. No scrubbing, it just disappeared. However, I was very disappointed, I used it one time, when I went back to use it second time, the pump sprayer would no longer work. That really sucks. I need RMR Solutions to send me a replacement sprayer that works, so I can use the rest of the bottle. The bottle does not have a customer service phone number or anything on it, just their name.